Hey, At Least We Don’t Pretend
Sure, we’re guilty too, but that was the past. A youthful indiscretion, if you will. We’re a changed fly-by-night website now. And these two Klipsch RF-25 Floorstanding Loudspeakers prove it.
Hook them to your stereo. Hook them to your home theater system. Hook them to that little clock radio that beeps to wake you up. It might take a little rewiring but you could do it. And using the dual 6.5 inch woofers and RF-25 bass will mean you won’t be able to sleep through that beeping ever again.
Honestly, who’s gonna need one speaker? Why, anyone that would just offer a single speaker is just trying to rip your hard earned money right from your… oh, we do? Next week, huh? Well, if you think about it, there are plenty of uses for a single speaker. Wasn’t Pet Sounds recorded in mono? Who needs two speakers anyway?
(psst, if the answer is you, buy now while you still can…)
Features
Warranty: 5 Year Klipsch
Features:
- Dual 6.5-inch woofers and Klipsch Tractrix™ Horn technology give the RF-25 bass authority and dynamic impact that defy its size
- 1-inch titanium dome compression driver tweeter for the high frequencies, loaded by a 6-inch square 90° x 60° Tractrix® Horn molded into the front of the enclosure
- Efficient, requires only a quarter the amplifier power of conventional speakers
- Works well standing alone in a stereo music system or anchoring a sophisticated home theater
- Low-resonance Cerametallic™ cones and cast-polymer frames enable the twin woofers to generate rich, clean, room-filling bass
- Magnetically shielded to prevent interference with direct-view television sets
- Amplifier connections are via two pairs of binding posts, which are strapped together for
normal wiring. Removing the straps allows the speaker to be bi-wired - Magnetic posts hold the RF-25’s low-diffraction grille securely in place and the outrigger feet can be fitted with adjustable-height rubber pads or spikes
- Sonically matched to other Klipsch Reference Series loudspeakers
Specifications:
- Frequency response: 45Hz-20kHz ±3dB
- Power handling: 125 w max continuous (500 w peak)
- Sensitivity: 97dB @ 2.83 volts/1 meter
- Nominal impedance: 8 ohms compatible
- Crossover frequency: 2633Hz
- Tweeter: K-137 1” (2.54cm) Titanium dome compression driver
- High frequency horn: 6” square 90°x60° Tractrix® Horn
- Woofer: Two K-1123-OB 6.5” (16.51cm) Cerametallic® cone / cast polymer frame
- Enclosure material: MDF
- Enclosure type: Bass reflex via rear-firing port
- Input connections: 2 sets of binding post speaker terminals (connected via brass strap jumpers)
- Dimensions: 38.9” (98.8cm) x 8.5” (21.6cm) x 13.8” (35cm)
- Weight: 44 lbs. (20kg)
- Finishes: Black Ash
- Built from: 2003
- Built until: 2006
In the box:
- 2 Klipsch RF-25 Floorstanding Speakers
- 8 Carpet Spikes
- 8 Floor Feet
- 8 Screws
Specs
Klipsch RF-25 Floorstanding LoudspeakerSpecs
Klipsch RF-25 Floorstanding LoudspeakerSales Stats
- Speed to First Woot:
- 0m 0.555s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|